SKYPIX Timelapse Creation / Shooting Scene

SKYPIX Timelapse Creation, Timelapse, Hyperlapse, Production

General-Term Filming
(General-term time lapse)

- We are presenting dynamic time lapse movies making full use of the SKYPIX motion equipments -
* Works are available at "Works Gallery" in the menu


TD-Dolly at 2m long with Q3 Engine. This Dolly is divided into 1m long rails, and is able to be assembled up to a 6m long rail. (Q3-TD3000)	Slope setting with a 3m rail. Great difference of the position in height can be realized. (Q3-TD3000)	Q3-TD3000 being set in 3m long inclined rail.


3m long horizontal rail on an assembling type scaffold. (Q3-TD3000)	3m long horizontal rail on an assembling type scaffold. (Q3-TD3000)	3m long inclined rail with pan motion at studio (Q3-TD3000 + L Pan/Tilt)


3m long horizontal rail with pan motion at studio (Q3-TD3000 + L Pan/Tilt)	3m long horizontal rail with pan motion at a concert hall (Q3-TD3000 + L Pan/Tilt)	3m long horizontal rail with pan motion at a construction site of apartment buildings. (Q3-TD3000 + L Pan/Tilt)


A unique installation: (1) A 4m long dolly (Q3-TDK4000) is mounted on the truss structure to move the camera being hung down from the dolly could move horizontally.　A rod to hang down the camera is being installed to the dolly.	A unique installation: (2) Move the truss structure to the above the set to film the timelapse movie with a motion to move horizontally the camera being hung down.	A unique installation: (3) Mount the 4m long dolly vertically on the truss structure above the set, to film the timelapse movie with a motion to move vertically the camera being hung down from the floor to the ceiling position.


Slides the camera up and down on the perfect vertical rail (2m long) to film the movement of the people in the office. (Q3-TD3000)	Tilts the horizontal rail (2m long) 90 degrees to realize the lowest position stably to film the feet of pedestrians rushing to work in the morning. (Q3-TD3000)


Filming a long-term timelapse of neighbor's building construction for three months with the SKYPIX's rainproof field filming system for a long-term timelapse.	SKYPIX's rainproof field filming system for a long-term timelapse. It has the ventilation system, anti-dew system, and timer system.	A vertical pole which diameter is about 50mm allows to install the system very easily.


filming a process of night construction at a subway station precincts. Fixed filming without dollies. A parallel filming with two cameras is executed for the scene that can't be repeated again.	Fixed filming without dollies at the observatory of Tokyo Sky Tree.	Fixed filming without dollies at the observatory of Tokyo Sky Tree. A dark curtain is used to prevent light reflection by window glass for a night view. All the control is done remotely from the PC.


Filming starry sky with a 2m long sloped rail. (X3pt Pro-TS2000)	Filmiing starry sky with a 2m long horizontal rail. (X3pt Pro-TS2000)	Filming starry sky with a 2m long horizontal rail. (X3pt Pro-TS2000)


Q3-TD3000 + L Pan/Tilt being set at 2m long rail in horizontal.	Waiting for the night sky after the filming in daytime. Q3-TD3000 + L Pan/Tilt being set at 2m long rail in horizontal.	A special star soft filter designed for a huge lens, Nikon 14-24mm, and a heavy duty dewing preventing heater. Q3-TD3000 + L Pan/Tilt at 2m long.


Filming with a motion to getting into the water. (Q3-TD3000)	Let the camera get into the branches of the weeping cherry tree. Q3-TD3000 + L Pan/Tilt being set in 2m long horizontal rail.	Using a low angle setting of the tripod. Q3-TD3000 + L Pan/Tilt being set in 2m long horizontal rail.


A Zoom motion is added to the regular Rail, Pan and Tilt motions with Q6 engine which can control 6 axes. (Q6-E1700 + L Pan/Tilt)	The short level foot allowed to film from the lowest angle above the ground without any tripods. (Q6-E1700 + L Pan/Tilt)	E-Dolly is a foldable type, and its installation and setting is very easy and quick. (Q6-E1700 + L Pan/Tilt)


1.7m long foldable rail (Q6-E1700 + L Pan/Tilt)	Interval exposures are given automatically controlling movement for 3 axes for the Rail, Pan and Tilt. (Q3-TD3000 + L Pan/Tilt)


The world smallest 3 axis dolly, X3pt Pro-H350. It is very small and require only single tripod. It enables us to use a dolly very easily in mountain climbing.	X3pt Pro-H350. Although the rail length is only 350mm, as two rails at the top and the bottom go the other way, camera can be slide for 0.7m.	X3pt Pro-H350. Only one dolly in the world that can be set on a single camera stand. Everthing is capable in a knapsack.


A small and light dolly （TS Dolly) & X3pt Pro. Very easy to handle with. It comes with three of 70cm rail, and very handy to travel with.	The small and light TS dolly makes it easy to set up the inclined rail .X3pt Pro-TS2000 being set at 2m long rail.	X3pt Pro-TS2000 being set in 2m long horizontal rail.


Optional "Advance rail" being installed to X3 pt Pro-TS2000.	With the optional advance rail, the camera can be moved forward nearly 2m .	The optional advance rail realizes a motion going through the rocks toward the water.


X3pt Pro-TS2000 being set in 2m long inclined rail.	For the daylight to night filming, a tablet PC is used to control exposures.X3pt Pro-TS2000 being set in 2m long horizontal rail.	Holy Grail filming requires a good post work after filming.X3pt Pro-TS2000 being set in 2m long horizontal rail.


Filming with a very complicated motions, that could be realized only by programmed operation controlling rail, pan and tilt at the same time.	X3pt Pro-TS2000 being set in 2m long inclined rail.	X3pt Pro-TS2000 being set in 2m long rail at the lowest angle.


The optional advance rail goes over the basin of a waterfall.	X3pt Pro-TS2000 being set in 2m long inclined rail.	X3pt Pro-TS2000 being set in 2m long inclined rail.


Filming from complete dark to sun rise controlling exposures automatically using tablet PC. A 2m long sloped rail and pan motion. (Q3-TD3000 + L Pan/Tilt)	Q3-TD3000 + L Pan/Tilt being set in 3m long horizontal rail.	Fixed filming of the construction of a small toilet aｔｔｈｅ extremely narrow space, using an auto pole and an auto clamp.


Q3-TD3000 + L Pan/Tilt being set in 3m long horizontal rail.	Q3-TD3000 + L Pan/Tilt being set in 3m long horizontal rail.	X3pt Pro-TS2000 being set for 2m long in almost vertical.


Light and compact X3pt Pro-TS2000 performs the best in a filming expedition.	Light and compact X3pt Pro-TS2000 performs the best in a filming expedition.	For the point difficult to carry in the equipment, only the compact X3pt Pro-H350 would do the job.


Light and compact X3pt Pro-TS2000 allows to set it up even at the dangerous small filming spot.	At the edge of the precipitous cliff, the forwarding dolly will film an exciting images.	At the edge of the precipitous cliff, the forwarding dolly will film an exciting images.


X3pt Pro-TS2000	X3pt Pro-TS2000	Light and compact X3pt Pro-TS2000 dolly is essential to get deep into the rocky area.


Light and compact X3pt Pro-TS2000 dolly is essential to get deep into the rocky area.	For the worst point to carry the equipment, X3pt Pro itself do the job as a simple rotator system.	Continuous filming from the starry sky to the sunrise and morning at 1500m of elevation in Mt. Yatsugatake. As the ski lift was available to carry the heavy equipment, a reliable Q3-TD3000 and L-Pan/Tilt rotator is used.


(Location in Myanmar) For the overseas location, X3pt Pro-TS1500 (500mm x 3) is essential which is capable even in a travel suitcase. The length of 1500mm is long enough to obtain a good motion effect.	(Location in Myanmar) X3pt Pro-TS1500 enables us to carry it up to a bad footing place easily.	(Location in Myanmar) A compact assembly type X3pt Pro-TS1500 system.


(Location in Myanmar) A compact assembly type X3pt Pro-TS1500 system.	(Location in Myanmar) A compact assembly type X3pt Pro-TS1500 system.	(Location in Myanmar) X3pt Pro-Skate. The Skate-Dolly does not require any rails to run.Together with a pan and a tilt, three axis control is available.


(Location in Myanmar) X3pt Pro-Skate. The Skate-Dolly can be used instantly anywhere without setting nor installation if the flat floor is provided.	(Location in Myanmar) X3pt Pro-Skate. The Skate-Dolly provides a special view from the dog & cat eye-position not like other methods. It is possible to run around the object running drawing circular arc around it.	(Location in Myanmar) X3pt Pro-Skate. The Skate-Dolly enables us to use a dolly even where the big equipment can not be brought in.


Q3-TD3000 + L Pan/Tilt being set in 3m long horizontal rail.	Q3-TD3000 + L Pan/Tilt being set in 3m long horizontal rail.	Q3-TD3000 + L Pan/Tilt being set in 3m long horizontal rail.


1.7m long foldable rail (Q3-E1700 + L Pan/Tilt)	(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.	(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.


(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.	(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.	(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.


(Location in Spain) Fixed filming without a motion control is used depending on a limitaiton of the location.	(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.	(Location in Spain) Only a pan motion is used with X3pt Pro.


(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.	(Location in Spain) A compact assembly type X3pt Pro-TS1500 dolly system.	Fixed filming for chasing a reflection of the flash of the rising sun.


Film the scene beyond the tall fence running a skate dolly on the edge of the fence. (X3pt Pro-Skate)	Q3-TD3000 and L-Pan/Tilt rotator system (3m) for the scene that needs a long running distance.	Easy to carry and use X3pt Pro-TS1500 dolly system in mountain climbing.


（Location in Palau） Ultra compact dolly, X3pt Terminator-H300. The picture shows the case for using a rail (slide) motion only.	（Location in Palau） Ultra compact dolly, X3pt Terminator-H300. The picture shows the case for using a 3 axis motions (Rail, Pan, Tilt), mounting the control engine with 2 rotators built-in on the rail.	（Location in Palau） Ultra compact dolly, X3pt Terminator-H300. The picture shows the case for using a 3 axis motions (Rail, Pan, Tilt), mounting the control engine with 2 rotators built-in on the rail.